Quick heat up time through effective heaters and only 7 kg tin content.
Super compact slim design.
Digital constant temperature pre-setting.
Highly corrosion-resistant tinning device.
Interface: optical coupler max. 35 V / 500 mA for ready signal & alarms control
Power supply: 230 V / 50 Hz - max. 5 A
Power consumption: 1.2 kW
Option
- automatic flux station FX-400
- lead-free tinning conversion kit for FA-400N
TT-31
We are sorry, this article doesn't belong any more to our range of products!
Flux Station - bench-top unit -
Dipping depth: 1-30 mm
Display: dipping depth - resolution in 0.1 mm
Delivery height: max. 1.5 m
Dimensions (LxW/LxWxH)
Dipping area: 40x50 mm
Bath: 150x100x140 mm
Container enclosure: 380x220x550 mm
Container volume: 5 l
The flux-container and the pump are built into a stable enclosure which protects them from impact and damage. The mains switch for the pump is mounted into this enclosure and is easily accessed.
Stop-plate can be adjusted to any flux depth from 1 to 30 mm. Using the integrated spindle with a millimeter display, the operator can set up the flux bath for a new depth within seconds.
The constantly repeatable flux depth ensures a much more accurate manual tinning.
The stop-plate increases production by more than 30 %.
230 V / 50 Hz - 10 W
TT-41
We are sorry, this article doesn't belong any more to our range of products!
Tinning Station - for manual dip-tinning -
Temperature: max. 380 ° C
Temperature control: PID (solid state switching)
Heat up time: 20 min (280° C)
Display: preset & actual temperature and dipping-depth
Tin amount: 0.181 l
Stop-plate depths: 0-25 mm - infinitely variable spindle position
Tub widths: 56 mm
The station is equipped with an adjustable plate which serves as a stop for an accurately repeatable tinning-length for wire-ends. This stop-plate can be adjusted to any depth up to 25 mm. Turning the integrated spindle with a millimeter display.
Tub for lead-free tin.
For the periodical tub cleaning, which is done about every two days, the stop-plate can be swiveled up and well out of the way. The whole inner tub is then easily accessed because the heating-element and the sensor are mounted on the outside.
Dimensions (LxWxH): 320x130x170 mm
Power supply: 230 V / 50 Hz (max. 1.6 A)
Power consumption: 200-360 W (temperature-dependant)