Preset mode:
Desired component number is keyed on the keyboard and the counter automatically stops when it reaches the corresponding component. The MEMORY function allows partial counting for the same component type, and MEMORY RECALL can show at any time the memory contents without loss of the actual counting data. Step number indication (division factor) is always present, showed on a two digit display.
Step by step (1 component at a time)
Partial counting memory.
Interface: RS232C - output for host computers (free software) or thermal label
230 V / 50 Hz
Option:
- adjustable empty reel
COUNTY
SMD ADAPTOR
Manual Counter for Taped Components
- counts axial, radial and SMD components -
Counting value: max. 899,999 pcs
Lead diameters: min. 4 mm / max. 14 mm
Bandolier width
Axial components: 55-110 mm
Radial components: max. 18 mm
Divider: 1-19
Display: 4 digits - height 13 mm
Modes:
Totalizer mode counting
Preset mode counting with an audible alarm when the desired component number is reached.
Relay output
Counting in both directions (left or right).
1.8 kg / 240x130x110 mm
230 V / 50 Hz
Option
Rechargeable modelavailable
SMD county adaptor:
The County adaptor for counting taped SMD components is an optional accessory for the County Component Counter. The maximum tape height is 56 mm and the maximum number of hole for component is min 0.5 - max 19. Mounting the adaptor does not require any tools and it is locked in place by snap action.
Component counting is achieved by counting the punched holes on the SMD tapes.
COUNTER-PEN
Handheld Digital Counter
- with marker -
Provides audio/visual counts to 99999 with reset button, on/off switch and pen cap.
Combination marker and digital counter designed for the lab and plant.
Each time a black mark is made with the felt-tipped pen, it automatically sounds a beep, and LCD displays the counts.