Flexible Printing System for cables, tubes etc.
- Features: Windows® fonts, inverse printout, barcodes, BMP formats etc. -
Enables printing of complex texts and logos.
By means of a special guide unit cables with outer-Ø of 1-26 mm can be printed with low running costs.
Printing area: max. 100 x 260 mm
Given that the right thermal transfer ribbon is used the thermo-transfer technology has better resistance to mechanical stress, chemical and physical influences than Ink-Jet printing.
No negative impact of the cable insulation as usually happens during the hot stamp marking (hot stamping) of cables. Only a few special insulations cannot be handled.
Printing speed up to 100 mm/s
High-resolution 'Corner Edge' thermal print head with 300 dpi.
Various interfaces such as USB, RS232, LAN, WLAN 802-11g, SYNC-24 (4/4, 24 V-dc), RS422 via converter.
Data input:
PC software: complex texts and layouts (The software evaluates the information and all required ASCII commands and forwards the print job to the control unit.)
Control unit: simple editor and memory management
Printable formats
texts: alphanumeric characters (character height freely programable), inverse printout, Windows® fonts, text alignment in 90°, 180° or 270° angle