Hot Stamping

Electro-pneumatical Marking Machine
-for one-/two-sided printing -

• Printing width
  • PMG.PRINT.50S: 90 mm
    (two-sided printing)
  • PMG.PRINT.50R: up to 85 mm
    (one-sided printing)
• Ring printing possible.
• Ideally suited for operation in fully automated stations.
• Embossing time: 0-1.98 s in 0.02 s steps
• Embossing temperature: 70° C - 200° C
• Pre-heating time: 5-8 min
• Approx. 30 kg / 500 x 550 x 590 mm
• Compressed-air supply: 2-6 bar
• 230 V / 50 Hz - 100-200 VA
   

Electro-pneumatical Marking Machine
- for colored, double-side printing -

• Diameters: cables outer-Ø up to 10 mm
  (Ø > 10 mm on request)
• Designed for operation in fully automated stations and for single workstations (manual operation by manual trigger in set-up mode possible).
• Embossing time: 0-2 s
• Embossing temperature: 80° C - 180 ° C
• Set-up time: approx. 1 min
• Pre-heating time: approx. 6 min
• 2 cartridge with a capacity of up to 4 ribbons (depending on ribbon width) for quick change-over.
• 2 printing block mounts and heating elements.
• Pneum. feed of ribbons: 1-16 mm / adjustable
• Compressed-air supply: 2-6 bar
• 230 V / 50 Hz - max. 600 VA
• Option
  - visual ribbon monitoring
  - snap-on printing blocks for bar codes
   

Electrical Marking System
- for cables, tubes, labels, signs etc.

• 96 capital and small letters, 0-9 numbers and 34 special characters available.
• Ribbons are available in various colors.
• 2-line marking is problem-free possible.
• Simple operation and programming by means of keypad and 40x4 display.
• Full range setting functions, for example, mark positioning, feeding capacity, mark density etc.
• Processing time:
  e.g. 2000 cycles/h with 5 characters
• RS32C interface for preparing print data and check on the PC.
• 230 V / 50 Hz
   

Manual Tabletop Device
- for cables, tubes, labels, signs etc.

• Equipped marking head is pressed downside by means of a lever apparatus.
• Extensive range of letters, numbers and characters:
  • 96 capital and small letters
  • 0-9 numbers
  • 34 special characters
• 'Ready-to-use'-box: as flat (tubes, cable ties) or curved form (cables, wires) are included with the basic package.
• 230 V / 50 Hz
• Option
  H402-07 with 7 wheels
  H402-12 with 12 wheels
  H402-18 with 18 wheels
   

Hand-held Marking Machine
- for cables, wires, tubes etc. -

• Temperature: max. 150° C - 4-step control
• Character wheel system:
  • Character sizes in 2,4x2,4/1,8x1,8/1,8x0,9 as flat (tubes, cable ties) or curved form (cables, wires).
  • 11 facets per wheel (10 characters plus blank)
  • Quick-Change-System
  • 7 wheels
• 0.85 kg / 375 x 285 x 120 (w/o power supply)
• Incl. power supply
  • Input: 230 V / 50 Hz
  • Output: 10 V=

Electrical Hot Stamping Machine
- with rolling apparatus for hose adaptor (hydraulic hose lines) -

• Operating range: DN05-DN32
• Hot marking insets:
  - type holder (2-line)
  - combination stamping press (1-line with
     3 daisy wheels)
• Stamps (type height 3 mm):
  assortment SPT-3MM or loose availably,
  special characters or logos on demand
• 23.9 kg (26.4 kg) / 370 x 280 x 430 (500) mm
• 230 V / 50 Hz