The product is currently being revised and is not available until further notice!
Handtaping Machine - for cable harness up to Ø 20 mm -
▫ electrically driven hand-taping machine for spiral taping on assembly board ▫ easy entry on the harness due to an automatic positioning of the winding head ▫ automatic tape applying ▫ tape - cutting device ▫ dynamic balancing of the machine, over the complete diameter of the tape ▫ ergonomically designed handle ▫ adjustable winding table, for harnesses up to 20 mm diameter ▫ steplessly variable drive up to 400 rpm ▫ Tape diameter up to 85 mm outside ▫ Tape width 9-19 mm ▫ all common sticky tapes usable ▫ taping in both directions ▫ slewable Balancer attatchment ▫
Winding Table width: 65 mm
Speed: 30-400 rpm
Tape width: 9-19 mm
Harness diameter: 2-20 mm
Connection: 230V - Adapter
Dimensions (WxHxD): 100/340/180 mm
Weight: 1,8 kg
KTR-10
Electro-pneumatical Taping Machine
- for simple or long cable kits -
Application: Taping of simple or long cable kits.
Cable harness diameter: outside-Ø up to 20 mm (or as customer requirements)
Adhesive taps
Width: 9-19 mm (or as customer requirements)
Material: any conventional adhesive tape
Rotation speed: 100-1000 rpm - variable speed control via foot pedal
Branch-offs can be quickly inserted or lined up due the open winding head.
Power supply: 230 V / 50 Hz - 1-phase
Compressed-air supply: 6 bar
Option:
- tape end detection
- armrest made of wood or vanished MDF plate
- table-top machine available with pedestal
KTR-100
Electro-pneumatical Taping Machine
- with length measurement and controlled feed motion -
Application: Taping of simple cable kits and highly complex cable modules (e.g. door cable kits, mirror wiring, battery cable kits, roof cable kits, among others complex cable harnesses with length measurement). A form or assembly board for cable harnesses is no longer required in most cases.
Cable harness diameter: outside-Ø up to 20 mm (or as customer requirements)
Adhesive taps
Width: 9-19 mm (or as customer requirements)
Material: any conventional adhesive tape
Rotation speed: 100-1000 rpm
Incl. winding head positioning unit.
Feed rate: 0-70 mm/rotation
SPS-controlled, semi-automatic taping machine.
Programming: via touch panels or touch button panels from Siemens (e.g. TP177B, OP177B)
Program memories: 100 programs with 20 steps per program
Maintenance-free and reliable operation.
Massive guard cover with clear view on to the winding table.
Power supply: 230 V / 50 Hz - 3-phase
Compressed-air supply: 6 bar
Option:
- height adjustment
- armrest made of wood or vanished MDF plate
- central data store
- winding table for small diameters
- device for reduction the wire-twisting
KTBE-50
Electro-pneumatical Bundling Machine
- ideal for small cross-sections -
Application: Bundling, fixating, insulating, marking, labeling. Particularly suitable for small cross-sections, however also suitable for large cross-sections.
Bundle diameter: outside-Ø 3-18 mm (or as customer requirements)
Adhesive taps
Width: 9-50 mm
Material: any conventional adhesive tape
Processing time: approx. 2.5 s
Cable set is perfectly sheathed with your specified parameters via two synchronized drives.
Cutting of adhesive tape with a self-cleaning low-wear shear blade.
Thanks to the intelligent gripper receptacle the cross-section of the inserted cable set is detected automatically and the strip length required in this regard is made available.
Process-controlled and reproducible high quality.
Maintenance-free and reliable operation.
Power supply: 230 V / 50 Hz - 1-phase
Compressed-air supply: 6 bar
Option:
- intelligent gripper system
SPIRULA
The product SPIRULA has been discontinued by the manufacturer! We do still sell wearparts for the units except electronicboards and outerhousings.
Hand-held Tape Wrapper
Jaw opening: max. 40 mm
Tape diameter:
outside-Ø max. 140 mm
inside-Ø 20 mm
Mains or battery operation.
Operating speed
10-180 rpm on mains operation - manual mode
10-180 rpm on battery operation - manual mode
10-280 rpm on mains operation - table-top version
Battery operation time: max. 2 h
(1 h with 140 rpm and cables with 19 mm PVC insulation)