Thermal stripping device for wires with nylon, Kynar®, silicon, Tefzel®, teflon or PTFE insulations.
Temperature: from 149° C (300° F) up to 843° C (1450° F) adjustable
Hand units
2A: strip large diameter conductors and jackets including irregular shaped cross-sections / thermal knife (single blade)
4A: AWG 36-24 / pliers - stripping holes
4B: AWG 28-18 / pliers - stripping holes
4C: for use on cable jackets or larger diameter
conductors / pliers - flat blade
1.1 kg / 120 x 120 x 120 mm
230 V / 50 Hz (110 V / 60 Hz) - 20 W
DSP-Series
In the video with explanation you can
see how easy the DSP works.
Chemical Wire Stripper - for connecting leads and enameled wires -
Wet chemical process for removing of various insulations.
The DSP Stripping Pots are designed specifically for use with Dip Strip. Dip Strip is used to chemically remove the insulation from virtually all magnet and enamel wires of all sizes and insulation types, without damage to the wire. When heated in the specially designed stripping pot, the Dip Strip melts and wires are immersed in the Dip Strip to strip the insulation. The stripped wires are then rinsed in water and Dip Clean Metal Cleaner to remove oxides and residue. Dip Strip does not corrode conductors as will acid strippers. Custom square and rectangular pots available.
Stripping pot
internal dimensions
DSP-1/DSP-2/DSP-3: Ø 76.2 x 57.1 [mm]
DSP-8: Ø 203 x 57 [mm]
temperature range: 37.8°-426.6° C
temperature control
DSP-1: standard control
DSP-2/DSP-8: feedback control
DSP-3: high output control
power: 240 V - 50/60 Hz
Dip Strip
melting temperature: 260° C
normal use temperature: 371°-399° C
max. operating temperature: 438° C
Stripping time (test samples)
AWG 18 (Ø 1.02 mm) / Polyester insulation: 2 s
AWG 24 (Ø 0.51 mm) / Polyester insulation: 1 s
AWG 40 (Ø 0.079 mm) / Nylon insulation: 0.5 s