cheap and reliable machine with easy operation - ideal for switch cabinet construction
(AWG#18-30 / 0.05-2.5 mm²)
Cross-section: 0.05-2.5 mm² / AWG 30-18
Material passages: max. Ø 4.8 mm
Cutting lengths: from 0.1 mm up to 99.999 m
Wire stripping: 0.1-35 mm each cable end
Measuredness: ± (0.2 + 0.002 x total length) mm
Blade guide: horizontal
Program memories: 248 internal memory places
Blade/feed drives: stepper motors
Processing capacity: e.g. 85 pcs/min at total length of 100 mm - stripped off at a length of each 3 mm on both sides
20 kg / 360 x 288 x 200 mm
230 V / 50 Hz - 240 W
Supplied with guide components, safety cover and wire straightener.
ZDBX-2
reliable and inexpensive machine with easy operation and different blade types (AWG#12-30 | 0.05-4.0 mm²)
Cross-section: 0.05-4 mm² / AWG 30-12
Material passages: max. Ø 6.8 mm
Cutting lengths: from 0.1 mm up to 99.999 m freely programmable
Wire stripping: 0.1-35 mm each cable end
Measuredness: ± (0.2 + 0.002 x total length) mm
Blade guide: vertical (standard V-blades)
Program memories: 248 internal memory places
Blade/feed drives: stepper motors
Processing capacity: e.g. 90 pcs/min at total length of 100 mm - stripped off at a length of each 3 mm on both sides
Compressed-air supply: 6 bar (Operation possible without compressed-air. Only necessary if blow off function for removal of insulation scraps in knife block will be used.)
35 kg / 430 x 340 x 250 mm
230 V / 50 Hz - 260 W
Supplied with guide components, safety cover and wire straightener.
Option
- radius V-blades and more special blades
ZDBX-4
reliable machine for thicker cables with easy operation and different blade types (AWG#8-28 | 0.09-10.0 mm²)
Cross-section: 0.09-10 mm² / AWG 28-8
Material passages: max. Ø 6.8 mm
Cutting lengths: from 0.1 mm up to 99.999 m freely programmable
Wire stripping: 0.1-35 mm each cable end
Measuredness: ± (0.2 + 0.002 x total length) mm
Blade guide: vertical (standard V-blades)
Program memories: 248 internal memory places
Blade/feed drives: stepper motors
Processing capacity: e.g. 60 pcs/min at total length of 100 mm - stripped off at a length of each 3 mm on both sides
Compressed-air supply: 6 bar (Operation possible without compressed-air. Only necessary if blow off function for removal of insulation scraps in knife block will be used.)
37 kg / 430 x 268 x 360 mm
230 V / 50 Hz - 300 W
Supplied with guide components, safety cover and wire straightener.
Option
- radius V-blades and more special blades
ZDBX-6
machine for very short lengths (19 mm + stripping lengths) without moving the insulation (AWG#20-36 | 0.013-0.75 mm²)
Cross-section: 0.013-0.75 mm² / AWG 36-20
Material passages: max. Ø 4.8 mm
Cutting lengths: from 0.1 mm up to 99.999 m freely programmable
Wire stripping: 0.1-30 mm each cable end
Measuredness: ± (0.2 + 0.002 x total length) mm
Blade guide: vertical (standard V-blades)
Program memories: 248 internal memory places
Blade/feed drives: stepper motors
Processing capacity: e.g. 90 pcs/min at total length of 100 mm - stripped off at a length of each 3 mm on both sides
Compressed-air supply: 6 bar (Operation possible without compressed-air. Only necessary if blow off function for removal of insulation scraps in knife block will be used.)
35 kg / 430 x 260 x 360 mm
230 V / 50 Hz - 300 W
Supplied with guide components, safety cover and wire straightener.
Option
- radius V-blades and more special blades
ZDBX-8
reliable machine with 3-stage function for coaxial cable or long stripping lengths (AWG#8-26 / ~ 0.5-16 mm²)
Cross-section: ~ 0,5-16 mm² / AWG 26-8
Material passages: max. Ø 8.5 mm
Cutting lengths: 0.1 mm bis 99.999 m
Wire stripping: 0.1-70 mm (r.) / 0.1-250 mm (l.)
Measuredness: ± (0.2 + 0.002 x Gesamtlänge) mm
Blade guide: vertical
Program memories: 248 internal memory places
Blade/feed drives: stepper motors
Processing capacity: e.g. 90 pcs/min at total length of 100 mm - stripped off at a length of each 3 mm on both sides
Compressed-air supply: 6 bar (Operation possible without compressed-air. Only necessary if blow off function for removal of insulation scraps in knife block will be used.)
35 kg / 430 x 340 x 250 mm
230 V / 50 Hz - 270 W
Supplied with guide components, safety cover and wire straightener.
Option
- radius V-blades and more special blades
ZDBX-9
robust machine with easy operation and high process speed (AWG#16-30)
Cross-section: AWG 30-16
Material passages: max. Ø 6.8 mm
Cutting lengths: from 0.1 mm up to 99.999 m freely programmable
Wire stripping: 0.1-30 mm each cable end
Measuredness: ± (0.2 + 0.002 x total length) mm
Blade guide: vertical (standard V-blades)
Program memories: 248 internal memory places
Blade/feed drives: stepper motors
Processing capacity: e.g. 120 pcs/min at total length of 100 mm - stripped off at a length of each 3 mm on both sides
Compressed-air supply: 6 bar (Operation possible without compressed-air. Only necessary if blow off function for removal of insulation scraps in knife block will be used.)
35 kg / 430 x 340 x 250 mm
230 V / 50 Hz - 260 W
Supplied with guide components, safety cover and wire straightener.
Option
- radius V-blades and more special blades
ZDBX-11
machine with quadro feed - stripping up to 200 mm for sheathed cables up to 16.0 mm ² (AWG#8-26 / 0.09-16 mm²)
Cross-section: 0.09-16 mm² / AWG 26-8
Material passages: max. Ø 20 mm
Cutting lengths: 1 mm bis 99.999 m
Wire stripping: 1-200 mm each cable end
Measuredness: ± (0.2 + 0.002 x Gesamtlänge) mm
Blade guide: vertical
Program memories: 248 internal memory places
Blade/feed drives: stepper motors
Roller lifting: pneumatical
Processing capacity: e.g. 75 pcs/min at total length of 150 mm - stripped off at a length of each 3 mm on both sides
Compressed-air supply: 6 bar
35 kg / 520 x 365 x 550 mm
230 V / 50 Hz - 270 W
Supplied with guide components, safety cover
Option
- radius V-blades and more special blades
ZDBX-16
powerful machine with servo drives and touchscreen for cables up to 90 mm ² (AWG#3/0-20 | 0.5-90 mm²)
Cross-section: 0.5-90 mm² / AWG 3/0-20
Material passages: max. Ø 25 mm
Cutting lengths: 1 mm bis 99.999 m
Wire stripping: 1-140 mm (r.) | 1-255 mm (l.)
Measuredness (w/o encoder):
± (0.4 + 0.004 x total length) mm
Measuredness (w/ encoder):
target/actual comparison with correction
Blade guide: vertical
Program memories: 248 internal memory places
Blade/feed drives: servo drives
Roller lifting: pneumatical
Processing capacity: e.g. 60 pcs/min at total length of 150 mm - stripped off at a length of each 3 mm on both sides
Cutting lengths: from 0.2 mm up to 99.999 m freely programmable
Wire stripping: 0.2-39 mm each cable end
Measuredness: ± (0.2 + 0.002 x total length) mm
Blade guide: vertical (standard V-blades)
Program memories: 248 internal memory places
Blade/feed drives: stepper motors
Processing capacity: e.g. 104 pcs/min at total length of 100 mm - stripped off at a length of each 3 mm on both sides
Compressed-air supply: 6 bar (Operation possible without compressed-air. Only necessary if blow off function for removal of insulation scraps in knife block will be used.)
35 kg / 430 x 260 x 400 mm
230 V / 50 Hz (110 V / 60 Hz) - 320 W (STBY 100)
Supplied with guide components, safety cover and wire straightener.
Option
- radius V-blades and more special blades
- BX-CF1A: slitting unit for zipcords, ribbon cables
- interface for external equipment
Cutting lengths: from 0.2 mm up to 99.999 m freely programmable
Wire stripping: right 0.1-12 mm / left 0.1-30 mm
Measuredness: ± (0.1 + 0.001 x total length) mm
Blade guide: vertical (standard V-blades)
Program memories: 248 internal memory places
Blade/feed drives: stepper motors
Processing capacity: e.g. 90 pcs/min at total length of 100 mm - stripped off at a length of each 3 mm on both sides
Compressed-air supply: 6 bar (Operation possible without compressed-air. Only necessary if blow off function for removal of insulation scraps in knife block will be used.)
34 kg / 430 x 260 x 400 mm
230 V / 50 Hz (110 V / 60 Hz) - 320 W (STBY 100)
Supplied with guide components, safety cover and wire straightener.
Option
- radius V-blades and more special blades
- slitting unit for zipcords, ribbon cables
- interface for external equipment
Cutting lengths: from 0.2 mm up to 99.999 m freely programmable
Wire stripping: 0.2-39 mm each cable end
Measuredness: ± (0.2 + 0.002 x total length) mm
Blade guide: vertical (standard V-blades)
Program memories: 248 internal memory places
Blade/feed drives: stepper motors
Processing capacity: e.g. 45 pcs/min at total length of 100 mm - stripped off at a length of each 3 mm on both sides
Compressed-air supply: 6 bar (Operation possible without compressed-air. Only necessary if blow off function for removal of insulation scraps in knife block will be used.)
38 kg / 430 x 260 x 400 mm
230 V / 50 Hz (110 V / 60 Hz) - 320 W (STBY 100)
Supplied with guide components, safety cover and wire straightener.
Option
- radius V-blades and more special blades
- BX-CF3A: slitting unit for zipcords, ribbon cables
- interface for external equipment
