Crimping Machines (40 mm)

NCPP-20
 

Crimping press

  • cheap, robuste eccentric press
  • Cross-section: 0.05-6 mm²
  • UT (bottom dead center) 135.78 mm / 40 mm stroke
  • Press force: 20 kN
  • Frequency convert controller enables infinitely adjustment of stroke time period.
  • Slow motion for setup
  • Option: crimp force monitoring, work light
  • 230 V / 50 Hz - 1.5 kW

Mecal-TT
 

Crimping press

  • Cross-section: up to 6 mm²
  • UT (bottom dead center) 135.78 mm / 40 mm stroke
  • Press force: 20 kN
  • Option: crimp force monitoring, work light
  • 230 V / 50 Hz - 0.55 kW

CRIMPMATIC-905
 

Crimping press
for enamelled wires

  • Wire range: 0.08-1,8 mm
  • Press force: 20 kN
  • Cycle time: 0.3 s
  • Suitable for parallel and end connector terminal
  • Cutter feature (connector terminals) for pro-
    truding wire end
  • Option: crimp force monitoring, work light
  • 230 V / 50 Hz - 0.75 kW

CRIMPMATIC-963
 

Crimping press

  • Cross-section: up to 6 mm²
  • UT (bottom dead center) 135.78 mm / 41 mm stroke
  • Press force: 20 kN
  • Cycle time: 0.3 s
  • Jogging mode for easy setup
  • Option: crimp force monitoring, work light
  • 230 V / 50/60 Hz

CRIMPMATIC-970
 

Crimping press
for POWER-CRIMP-MQC

  • Cross-section: up to 16 mm²
  • UT (bottom dead center) 158.4 mm / 44 mm stroke
  • Press force: 50 kN
  • Cycle time: 0.4 s
  • Option: crimp force monitoring, work light
  • Adaptor plate allows the use of standard MQC (crimp applicator) as optional extras.
  • 400 V / 50 Hz - 440 V / 60 Hz

STRIPMATIC-940
 

Crimping press
with stripping unit

  • Force pilot operated cycle
  • Cross-section: up to 2.5 mm² / AWG-14
  • UT (bottom dead center) 135.78 mm / 41 mm stroke
  • Press force: 20 kN
  • Wire stripping: 2-10 mm
  • Wire stripping - Conductor length: min. 25 mm
  • Cycle time: 0.5 s
  • Option: crimp force monitoring, work light
  • 230 V / 50 Hz - 0.75 kW
  • Compressed-air supply: 6-8 bar
     

STRIPMATIC-944
 

Crimping press
with stripping unit

  • Cross-section: up to 2.5 mm² / AWG-14
  • UT (bottom dead center) 135.78 mm / 41 mm stroke
  • Press force: 20 kN
  • Wire stripping: 1-10 mm
  • Wire stripping - Conductor length: min. 25 mm
  • Zero-cut: from approx. 1-3 mm
  • Cycle time: 1.0 s
  • Option: crimp force monitoring, work light
  • 230 V / 50 Hz - 0.75 kW
  • Compressed-air supply: 6-8 bar
     

STRIPMATIC-944S
 

Stripper-Crimper
with seal mounting

  • Cross-section: 0.14-2.5 mm²
  • UT (bottom dead center) 135.78 mm / 41 mm stroke
  • Press force: 20 kN
  • Wire stripping: min. 30 mm
  • Seal diameter: max. 10 mm
  • Zero-cut: from approx. 1-3 mm
  • Cycle time: 1.9 s
  • Option: crimp force monitoring, work light
  • 230 V / 50 Hz - 0.75 kW
  • Compressed-air supply: 6-8 bar